|
While working on my Honda Preludes, I've learned a thing or too,
and had a lot of fun. I know there are a lot of other people out there
who have a similar passion for Preludes, and it would be a really
big shame if I didn't share what I have learned with them. I encourage
you to read what myself and others have written. This hobby should
be all about sharing, and appreciating what others have done. Turn
those wrenches.
3rd Generation Prelude Write Ups
| Title: |
Intake Manifold Clean
Up |
| Written By: |
Harley C - harleyc.com |
| Synopsis: |
Step by step instructions on how to remove the throttle-body
and upper half of the manifold from a 3rd generation prelude.
The article is based on work done to a B21A1 engine, but would
be applicable to preludes with other engines. |
| Car Model: |
1991 Honda Prelude SR |
| Engine Model: |
B21A1 |
| Title: |
Painted Calipers and Rotors |
| Written By: |
Harley C - harleyc.com |
| Synopsis: |
Ever wanted to paint the calipers on your third generation prelude?
Now you can! This article details the steps needed to remove,
clean, and paint brake components. The contents of this article
could be easily applied to other vehicles. |
| Car Model: |
1991 Honda Prelude SR |
| Engine Model: |
B21A1 |
| Title: |
Painted Exhaust Manifold
Heat Shield |
| Written By: |
Harley C - harleyc.com |
| Synopsis: |
Exhaust manifold heat shields can get pretty gross sometimes.
These directions will explain how to tidy things up a little bit.
All you need is some wrenches and paint. |
| Car Model: |
1991 Honda Prelude SR |
| Engine Model: |
B21A1 |
| Title: |
JDM B20A Engine
Swap |
| Written By: |
Alan - http://home.earthlink.net/~alanida1/ |
| Synopsis: |
General instructions detailing a JDM B20A engine swap into a
3rd generation Prelude. Includes parts list and basic procedures.
These instructions could easily be applied to other 3rd generation
Prelude models. |
| Car Model: |
1990-1991 Honda Prelude |
| Engine Model: |
B21A1 |
| Title: |
Shortening the Shifter |
| Written By: |
Harley C - harleyc.com |
| Synopsis: |
Instructions on how to shorten the shifter of your Prelude.
These instructions were written for 3rd generation Preludes, but
could easily be applied to other cars. You'll need a tap &
die set to complete this project, and a set of basic tools. |
| Car Model: |
1991 Honda Prelude |
| Engine Model: |
B21A1 |
| Buy Now! |
You can buy one of my short shifters in my Prelude
Store. This might save you having to buy special tools, and
the labor time. |
| Title: |
Fixing a Leaking Power Steering Pump |
| Written By: |
Harley C - harleyc.com |
| Synopsis: |
Instructions on how to replace the shaft oil seal on a Honda
Prelude power-steering pump. This solves a common problem in Preludes
where the pump seal fails and ends up spraying PS fluid all over the engine bay
and on the underside of the hood. |
| Car Model: |
Write up based on a 3rd generation Prelude, but the procedure
would likely work on any Prelude. |
| Engine Model: |
Any |
Related Ads
|
Contribute
If you have written a article on Honda Preludes, send it to me, and
I will consider posting it. You will be credited as the author. If
you choose, I will also post your email address and a link to your
web site (if you have one) so readers can contact you if they choose.
Content Guidelines: Submissions must contain
valuable information for Prelude enthusiasts. This could include things
like performance tips, detailing tips, common problem fixes, etc.
I encourage you to verify that any technical information you provide
is accurate. Articles that contain sloppy mods, or are otherwise disrespectful
to the car will not be posted.
Please make an effort to write your article as best you can. Write
sentences that are as easy to understand as possible. If you article
uses acronyms, please specify what the acronym stands for somewhere
in the text.
Image Guidelines: You may include as many
images as you want. Images that are not relevant to the article in
question will not be posted. Please submit your images in JPG format.
I will create any thumbnails needed for when the article is posted.
How To Submit: Please send your submission
to prelude AT harleyc DOT com. Microsoft Word documents are
suggested, however, I will do my best to accommodate other formats.
I reserve the right to reject any submission I deem
inappropriate. I also reserve the right to modify your submission
to match the formatting of my web site as I see fit.
Validated By
|